Filters
Close

Tech Accessories

View as
Sort by
Display per page
Showing 121 - 150 of 2819 results

Ear Buds In Carabiner Case

Set of earbuds in a convenient tube which has a silicone screw cap with a carabineer. A production lead time of 10-15 working days applies to this product. Colours: White, Orange, Red, Green, Blue, Purple, Black. Dimension: W 115mm x H 25mm. Print Description: 51mm x 9.5mm. Print Type: Pad Print. Packing: Polybag. Less than minimum quantities are not available for this item.

Ear Buds With Shirt Clips

Set of earbuds with handy shirt clips to keep them in place when not in use. A production lead time of 10-15 working days applies to this product. Colours: White, Red, Lime Green, Blue, Black. Dimension: W 14mm x H 35mm. Print Description: 9.5mm x 13mm. Print Type: Pad Print. Packing: Polybag. Less than minimum quantities are not available for this item.

Phone Stand Ear Bud Holder

Set of earbuds in an angled plastic case with a silicone rim which acts as a phone holder. A production lead time of 10-15 working days applies to this product. Colours: White, Red, Blue, Black. Dimension: Dia 57mm. Print Description: 32mm (top). Print Type: Pad Print. Packing: Polybag. Less than minimum quantities are not available for this item.

Retractable Reflective Earbuds

Set of retractable earbuds with a reflector on them to ensure wearers are seen when outside. The reflector has a clip in the back for secure placement. A production lead time of 10-15 working days applies to this product. Colours: White, Red, Green, Blue, Black. Dimension: W 108mm x H 25mm. Print Description: 32mm x 9.5mm. Print Type: Pad Print. Packing: Polybag. Less than minimum quantities are not available for this item.

Wireless Ear Buds In Case

Set of Bluetooth earbuds in a compact plastic tube with a silicone cap. They operate with Bluetooth version 4.2 and have a built in microphone with volume control. Track selection is controlled with the +/- buttons and holding them down will control the music volume. A production lead time of 10-15 working days applies to this product. Colours: White, Orange, Red, Lime Green, Blue, Purple, Black. Dimension: H 108mm x Dia 32mm. Print Description: 44.5mm x 16mm. Print Type: Pad Print. Packing: Gift Box. Less than minimum quantities are not available for this item.

Roll Up Electronic Organizer

Roll up electronic organiser with an elastic cord closure. It is manufactured from a combination of 600D and 210D polyester and has internal elastic straps to hold accessories in place. A production lead time of 10-15 working days applies to this product. Colours: Black/Grey. Dimension: W 170mm x H 220mm. Print Description: 102mm x 32mm (rolled). Print Type: Screen Print. Packing: Bulk. Less than minimum quantities are not available for this item.

Expandable Silicone VR Viewer

Unique expandable virtual reality 3D viewer which is manufactured from plastic and silicone. It folds flat when not in use for easy storage and transportation. A production lead time of 10-15 working days applies to this product. Colours: Blue, Black. Dimension: W 150mm x H 90mm x 32mm. Print Description: 38mm x 25.5mm. Print Type: Pad Print. Packing: Polybag. Less than minimum quantities are not available for this item.

4 Port USB Phone Stand

Round high speed four port USB hub with a handy slide out phone stand and cable. A production lead time of 10-15 working days applies to this product. Colours: White, Red, Lime Green, Blue, Black. Dimension: W 60mm x H 50mm x 16mm. Print Description: 32mm. Print Type: Pad Print. Packing: Polybag. Less than minimum quantities are not available for this item.

4 Port Aluminium Phone Stand

High speed four port aluminium USB hub with a slide out phone stand and cable. A production lead time of 10-15 working days applies to this product. Colours: Silver, Red, Blue, Black. Dimension: W 108mm x H 25mm x 25mm. Print Description: 70mm x 9.5mm. Print Type: Pad Print. Packing: Polybag. Less than minimum quantities are not available for this item.

4 Port Traveler Phone Stand

High speed four port USB hub with a slide out phone stand and cable. A production lead time of 10-15 working days applies to this product. Colours: White, Red, Green, Blue, Black. Dimension: W 100mm x H 29mm. Print Description: 63.5mm x 19mm. Print Type: Pad Print. Packing: Polybag. Less than minimum quantities are not available for this item.

Rectangle Digital LED Watch

Multi function unisex watch with a double snap-closure silicone strap. It has single button operation with hour, minute, second, month and day functions. A production lead time of 10-15 working days applies to this product. Colours: White, Blue, Black. Dimension: 250mm. Face W 19mm x H 50mm. Print Description: 9.5mm x 5mm (face). Print Type: Pad Print. Packing: Polybag. Less than minimum quantities are not available for this item.

Auto Phone Mount

Magnetic phone mount which attaches securely to a car air vent. It uses a metal plate that attaches to the phone with double sided adhesive and won't leave marks if removed. A production lead time of 10-15 working days applies to this product. Colours: Plate: White, Red, Lime, Blue, Black. Mount: White, Red, Lime, Blue, Black. Dimension: Plate: W 44mm x H 64mm. Mount: Dia 44mm x 35mm. Print Description: 25.5mm (mount). Print Type: Pad Print. Packing: Gift Box. Less than minimum quantities are not available for this item.

Auto Phone Wallet

Magnetic phone mount which attaches securely to a car air vent. It is supplied with a unique magnetic silcone phone wallet which is attached to the phone. Once the wallet is on the phone it will snap onto the mount when required and can also be used for holding credit cards etc. A production lead time of 10-15 working days applies to this product. Colours: Phone Wallet: White, Orange, Red, Lime Green, Blue, Purple, Black. Mount: Black. Dimension: Phone Wallet: W 57mm x H 86mm. Mount: Dia 44mm x 35mm. Print Description: 25.5mm (mount). Print Type: Pad Print. Packing: Gift Box. Less than minimum quantities are not available for this item.

Auto Freshener Phone Holder

Car air freshener which attaches to a car air vent. It has a flip open cover which reveals an anti slip pad that acts as a phone holder. It is supplied with a lemon scent cartridge. A production lead time of 10-15 working days applies to this product. Colours: White, Red, Blue, Black. Dimension: W 38mm x H 57mm x 44mm. Print Description: 25.5mm x 32mm. Print Type: Screen Print. Packing: Polybag. Less than minimum quantities are not available for this item.

Aluminium Phone Stand Stylus

Stylish aluminium phone stand which has a stylus for use with touch screens and a soft touch cable clip on the reverse that will hold cables without damaging them. It laser engraves to an oxidised white colour and a production lead time of 10-15 working days applies to this product. Colours: Silver, Blue, Black. Dimension: Stand: W 90mm x H 51mm x 70mm. Stylus: W 76mm x Dia 6mm. Print Description: 63.5mm x 6.5mm (Stand Front). Print Type: Laser Engraving. Packing: Gift Box. Less than minimum quantities are not available for this item.

Lycra Phone Wallet - Heat Transfer

Soft and stretchy wallet which adheres securely to the back of a phone or phone case with strong 3M adhesive that won't leave marks if it is removed. It is ideal for holding a driver's licence, ID, hotel key, credit card, business cards, cash, house or car key and will even stretch to hold a set of ear buds. The wallet is branded with flexible heat transfers and a production lead time of 15 working days applies to this product. Colours: Light Grey, Dark Grey, White, Yellow, Orange, Pink, Red, Bright Green, Dark Green, Light Blue, Dark Blue, Navy, Purple, Black. Dimension: W 57mm x H 90mm. Print Description: W 40mm x H 50mm. Print Type: Heat Transfer. Packing: Loose packed. Less than minimum quantities are not available for this item.

Flash Power Bank and Torch

2000 mAh portable charger with A-grade LiPo battery for your mobile phone or small device that can recharge from a USB port. Features twist operated torch with high powered light. Recharge most phones on the market 1 time. Includes USB to Micro USB cable for charging Power Bank and to charge any phone/device that has a Micro USB input. Optional 3 in 1 cable with Micro USB and other major connectors on the market available at additional cost. Not suitable for tablets that draw a higher current. Optional EVA black zippered pouch available at additional cost. Optional 3 in 1 cable: LL9086 3 in 1 Combo USB Cable USB Cable - Micro, 8 Pin, 30 Pin LL9091 3 in 1 Combo USB Cable - Micro, 8 Pin, Type C Colours - Black Size - Torch: 125mmL x 25mmH, Box 127mmL x 39mmH x 39mmD Decoration Area(s) - Laser Engraved : Barrel - Rectangle 45mmL x 8mmH; 4CP Standard Label on Box : Front - Rectangle 55mmL x 30mmH; Screen Print on EVA Case : LL6668 Front/Back - Rectangle 100mmL x 50mmH, LL6674 Front/Back - Rectangle 100mmL x 50mmH; 4CP Digital Direct Print on EVA Case : LL6668 Front/Back - Rectangle 60mmL x 50mmH, LL6674 Front/Back - Rectangle 60mmL x 50mmH

Aluminium Velocity Mobile Phone Power Bank

2000 mAh portable charger for your mobile phone or small device that can recharge from a USB port. Includes USB to Micro USB cable for charging Power Bank and to charge any phone/device that has a Micro USB input. Optional 3 in 1 cable with Micro USB and other major connectors on the market available at additional cost. It will charge current mobile phones with one charging cycle. Can be charged up to 300 times. Not suitable for tablet devices that draw a higher current. Available in range of metallic colours, with silver and white accents. Optional box decoration or EVA black zippered pouch available at additional cost. Optional 3 in 1 cable: LL9086 3 in 1 Combo USB Cable USB Cable - Micro, 8 Pin, 30 Pin LL9091 3 in 1 Combo USB Cable - Micro, 8 Pin, Type C Colours - Black, Blue, Green, Orange, Purple, Red, Silver, White Size - Power Bank: 94mmH x 22mmH x 21mmD; Box: 97mmL x 50mmH x 27mmD Decoration Area(s) - Pad Print : Side/s - Rectangle 60mmL x 13mmH; Laser Engraved : Side/s - Rectangle 60mmL x 13mmH; 4CP Digital Direct Print : Side/s - Rectangle 80mmL x 13mmH; 4CP Standard Label on Box : Box - Rectangle 71mmL x 41mmH; Pad Print on EVA Case : LL6667 Front/Back - Rectangle 60mmL x 35mmH, LL6673 Front/Back - Rectangle 60mmL x 35mmH; 4CP Digital Direct Print on EVA Case : LL6667 Front/Back - Rectangle 60mmL x 35mmH, LL6673 Front/Back - Rectangle 60mmL x 35mmH

5 Port Wonder Wall Charger

5 USB Port Wall Charger with SAA Australian standards compliance certification. Figure 8 mains power lead with 2 Pin Plug, 5V Output & each USB port capped at maximum of 2.4A by smart chip. Maximum combined output of all 5 ports is 7.8A. A must have for homes, offices, restaurants that charge multiple devices. Optional EVA black zippered pouch available at additional cost. Colours - Black Size - Charger: 93mmL x 26mmH x 55mmD; Box 132mmL x 44mmH x 170mmD Decoration Area(s) - 4CP Digital Direct Print : Top - Rectangle 88mmL x 50mmH; Screen Print on EVA Case : LL6668 - Front/Back - Rectangle 100mmL x 50mmH; 4CP Digital Direct Print on EVA Case : LL6668 - Front/Back - Rectangle 60mmL x 50mmH

Aluminium Velocity Mobile Phone Power Bank

2000 mAh portable charger for your mobile phone or small device that can recharge from a USB port.Includes USB to Micro USB cable for charging Power Bank and to charge any phone/device that has a Micro USB input. Optional 3 in 1 cable with Micro USB and other major connectors on the market available at additional cost. It will charge current mobile phones with one charging cycle. Can be charged up to 300 times. Not suitable for tablet devices that draw a higher current. Available in range of metallic colours, with silver and white accents. Optional box decoration or EVA black zippered pouch available at additional cost. Colours - Custom Size - Power Bank: 22mmL x 94mmH x 21mmD Decoration Area(s) - Pad Print : Side/s - Rectangle 60mmL x 13mmH; Laser Engraved : Side/s - Rectangle 60mmL x 13mmH; 4CP Digital Direct 360° Panoprint (4 Sides) : Side Panels (x4) - Refer Line Drawing; 4CP Digital Direct Print on Box : Box - Full coverage (Refer line drawing); Pad Print on EVA Case : LL6667 Front/Back - Rectangle 60mmL x 35mmH, LL6673 Front/Back - Rectangle 60mmL x 35mmH; 4CP Digital Direct Print on EVA Case : LL6667 Front/Back - Rectangle 60mmL x 35mmH, LL6673 Front/Back - Rectangle 60mmL x 35mmH

Edison Power Bank

Stylish 5600mAh power bank with a handy flashlight and an LED power gauge which is ideal for charging mobile phones and other compatible electronic devices. The input power is 5V/1 Amp and the output power is 5V/1 Amp. Recharging time is 6-7 hours and the lithium ion battery can be recharged over 500 times from any USB port or a mains adaptor. Comprehensive instructions and a micro USB cable are included. An optional EVA carry case and a triple connector cable are available on request. Colours: Power bank: White, Black.
Carry case: Black. Dimension: Power bank: L 97mm x W 44mm x 22mm. Print Description: Power bank - 45mm x 22mm. Print Type: Pad Print. Packing: Individual boxes or an optional carry case.

Carry Case - Small

Small EVA carry case designed for storing a power bank along with charging cables and accessories. It will hold the Dalek, Edison, Electra, Flare Torch, Hypertron, Megatron, Phaser, Pulse, Sabre, Tesla, Proteus 2000 and Vader power banks. Colours: Black. Dimension: L 120mm x W 88mm x 46mm. Print Description: 75mm x 45mm. Print Type: Direct Digital. Packing: Loose packed.

Carry Case - Mini

Mini EVA carry case designed for storing a power bank and charging cable. It will hold the Dalek, Electra, Hypertron, Megatron, Phaser, Sabre and Tesla power banks. Colours: White, Yellow, Orange, Red, Bright Green, Light Blue, Blue, Black. Dimension: L 105mm x W 56mm x 42mm. Print Description: 70mm x 30mm. Print Type: Direct Digital. Packing: Loose packed.

Helix 16GB Flash Drive

Classic flash drive with a metal swivel and a soft touch rubber lacquered case. It has 16GB of memory with a USB 2.0 interface and data uploading is available on request. Helix can be presented in an optional magnetic closure gift box or the optional Helix Mini Case. Colours: Silver/Black, White/Black, Yellow/Black, Orange/Black, Pink/Black, Red/Black, Bright Green/Black, Green/Black, Teal/Black, Light Blue/Black, Blue/Black, Purple/Black, Black/Black. Dimension: Flash drive: L 56mm x W 20mm x 10mm. Print Description: 28mm x 15mm. Print Type: Pad Print. Packing: Bubble wrap sleeve or optional gift box.

Credit Card Flash Drive 4GB

Credit card size flash drive which can be branded with stunning full colour graphics on one or both sides. It has 4GB of memory with a USB 2.0 interface and data uploading is available on request. Colours: White. Dimension: W 55mm x L 85mm x 2mm. Print Description: 85mm x 54mm. Print Type: Direct Digital. Packing: Loose packed.

Mondo Earbuds

Set of earbuds in a convenient pocket size plastic carry case. Colours: White, Orange, Red, Green, Blue, Black. Dimension: Dia 55mm x H 20mm. Print Description: 49mm circle. Print Type: Pad Print. Packing: Loose packed.

Surge Power Bank

4000mAh touch activated portable charger with A Grade LiPo Japanese sony battery. Includes grey integrated micro usb/rechargeable cable connector cable and fold away 8 pin fitting. 4 graduated power remaining LED indicators. Item has a textured surface. Power Bank contains enough capacity to recharge most phones on the market with 1+ times and current model tablets 40% approx. Can be charged up to 300 times. Takes 4-5 hours to charge. Optional box decoration or EVA black zippered pouch available at additional cost. Colours - White Size - Power Bank: 140mmL x 14mmH x 73mmD; Box: 140mmL x 15mmH x 80mmD Decoration Area(s) - Screen Print : Front/Back - Rectangle 90mmL x 45mmH; 4CP Digital Direct Print : Front - Rectangle 140mmL x 74mmH (with rounded corners); 4CP Standard Label on Box : Front - Rectangle 90mmL x 43mmH; Screen Print on EVA Case : LL6668 Front/Back - Rectangle 100mmL x 50mmH, LL6674 Front/Back - Rectangle 100mmL x 50mmH; 4CP Digital Direct Print on EVA Case : LL6668 Front/Back - Rectangle 60mmL x 50mmH, LL6674 Front/Back - Rectangle 60mmL x 50mmH

Extreme Power Bank

12,000mAh touch activated portable charger with A Grade LiPo Japanese Sony battery. Includes integrated grey micro usb/rechargeable connector cable and fold away 8 pin fitting. 4 graduated power remaining LED indicators. Item has a textured surface. Power Bank contains enough capacity to recharge most phones on the market multiple times and a full tablet charge. Can be charged up to 300 times. Takes 4-5 hours to charge. Optional box decoration or EVA black zippered pouch available at additional cost. Colours - White/Grey Size - Power Bank: 140mmL x 16mmH x 73mmD, Box: 142mmL x 19mmH x 84mmD Decoration Area(s) - Screen Print : Front - Rectangle 90mmL x 45mmH; 4CP Digital Direct : Front - Rectangle 140mmL x 73mmH (with rounded corners); 4CP Standard Label on Box : Front - Rectangle 90mmL x 43mmH; Screen Print on EVA Case : LL6668 Front/Back - Rectangle 100mmL x 50mmH, LL6674 Front/Back - Rectangle 100mmL x 50mmH; 4CP Digital Direct Print on EVA Case : LL6678 Front/Back - Rectangle 60mmL x 50mmH, LL6674 Front/Back - Rectangle 60mmL x 50mmH

Picture Powercard Power Bank

2200 mAh portable charger with A Grade Li-Po battery for your mobile phone or small device that can recharge from a USB port. Includes integrated micro usb cable & separate 8 pin adaptor housed in case. Blue LED indicator. Recharges most phones on the market 1 time. Micro usb cable for charging Power Bank available at additional cost. Optional box decoration or EVA black zippered pouch available at additional cost. Colours - White Size - Power Bank: 99mmL x 8mmH x 62mmD, Box: 102mmL x 10mmH x 67mmD Decoration Area(s) - Pad Print : Front/Back - Rectangle 60mmL x 45mmH; 4CP Digital Direct Print : Front - Rectangle 99mmL x 62mmH, Back - Rectangle 63mmL x 62mmH; 4CP Standard Label on Box : Front of Box - Rectangle 71mmL x 41mmH; Pad Print on EVA Case : LL6667 Front/Back - Rectangle 60mmL x 35mmH, LL6673 Front/Back - Rectangle 60mmL x 35mmH; 4CP Digital Direct Print on EVA Case : LL6667 Front/Back - Rectangle 60mmL x 35mmH, LL6673 Front/Back - Rectangle 60mmL x 35mmH

Mini USB Fan

Powerful mini fan with flexible safety blades which has a USB connector that will plug into any USB port. Great for keeping cool while working at a computer or laptop. A production lead time of 10-15 working days applies to this product. Colours: White, Red, Lime Green, Blue, Black. Dimension: W 89mm x H 143mm. Print Description: Barrel - 19mm x 6mm (one colour). Print Type: Pad Print. Packing: Loose packed. Less than minimum quantities are not available for this item. MOQ applies per colour on this item.